• 联系我们
  • 地址:湖北武汉三环科技园
  • 电话:159116031100
  • 传真:027-68834628
  • 邮箱:mmheng@foxmail.com
  • 当前所在位置:首页 - 醉香卤
  • 瓷砖加工设备磨合期怎样保养才能减少故障
  • How to maintain ceramic tile processing equipment during the running-in period to reduce failures?

    Ceramic tile processing equipment will have a running-in period before it is used. The running-in period is an important link to ensure the normal operation of the loader, reduce the failure rate, and extend its service life. So how to maintain the ceramic tile processing equipment during the running-in period?

    1.Always pay attention to the workload of ceramic tile processing equipment during the running-in period. Under normal circumstances, the workload during the running-in period should not exceed the rated workload in the machine manual.multi-function cutting machine of ceramic tile. If it is specified in the manual, proper workload should be arranged to prevent overheating caused by long-term continuous operation of the machine.

    ��Ceramic tile processing effect��

    2. Pay attention to the instructions of the instrument. In case of abnormality, stop the work in time and eliminate it. Before the cause is found, the work should be stopped if the fault is not eliminated.

    3. Pay attention to check the sealing of the whole machine, check whether the pressure of lubricating oil and circulating water is sufficient, and add lubricating oil to each lubrication point in time.Top 10 ranking of automatic ceramic tile cutting machine.

    4. Keep the ceramic tile processing equipment clean, adjust and tighten loose parts in time to prevent parts from aggravating or losing parts due to looseness.

    5. At the end of the running-in period, the ceramic tile processing equipment should be maintained,manual tile cutting machine and the oil that has reached the service life should be replaced and inspected.

    (The hand push ceramic tile cutting machine)

    The requirements for the use and maintenance of ceramic tile processing equipment during the running-in period can be summarized as: strengthening the training of operators, reducing the workload of ceramic tile processing machinery, and paying attention to inspecting various sealing components. how much is multi-functions ceramic cutting machine.As long as paying attention to the maintenance of ceramic processing machinery during the running-in period, and implementing it as required, it can reduce the occurrence of early failures, extend the service life, and improve operating efficiency.which brand of manual tile cutter is good?

    Above,it is about the maintenance of the ceramic tile processing equipment during the running-in period. If there is anything you don’t understand, please call us. We will be happy to answer all the problems for you.

    FOSHAN NANHAI HONGYUN CERAMIC MACHNERY CO.,LTD

    Tel:+86 18666532535

    Email: hanistay@foxmail.com

极速浏览器 Glass Bottle beer Filling Line 狗狗币